Transferring palletized freight across multi-tier mezzanines, this automated vertical reciprocating conveyor (VRC) links plant conveyor loops with motorized live-roller carriages. The high-speed hoist clears floor congestion, moving unit loads between elevation datums at hoist speeds up to 45 m/min.
• Safe Working Load (SWL): 2,000 kg (100% continuous duty rating; 125% proof load verified)
• Civil Footprint: Surface mount design; zero pit excavation required
• Vertical Travel Velocity: Variable frequency drive speeds up to 45 m/min
• Carriage Interface: Bi-directional live roller deck matched to 500 mm infeed conveyor datums
| Engineering Metric | Base Production Baseline | ETO Configurable Envelope | Safety Compliance & Standards |
| Safe Working Load (SWL) | 2,000 kg (4,409 lbs) | 500 kg to 5,000 kg | 125% proof tested; ASME B20.1:2021 |
| Vertical Hoist Speed | 40 to 45 m/min (131–147 ft/min) | 10 m/min to 60 m/min variable | Closed-loop vector drive; dynamic braking |
| Vertical Travel Stroke | 8,000 mm (2-stop datum) | 3,000 mm to 24,000 mm (multi-stop) | Machined T90 guide rails; laser aligned |
| Carriage Deck Interface | Powered live roller conveyor | Live rollers, plastic chain, flat belt | Bi-directional pass-through transfer logic |
| Pallet Footprint Capacity | 1,200 x 1,200 mm GMA/Euro | 800 x 600 mm up to 2,500 x 2,000 mm | Single pallet or dual tandem configurations |
| Shaft Perimeter Guarding | 4-sided steel mesh panels | Expanded mesh, polycarbonate, steel | Full-height physical barrier; ISO 14120 |
| Maintenance Access | Vertical ladder with fall arrest | Caged ladders or modular stairs | OSHA 1910.28 & EN ISO 14122-4 compliant |
| Landing Gate Automation | Rapid-roll PVC doors | Roll-up, bi-parting, or vertical rise | Interlocked safety logic; EN ISO 14119 |
| Hoist Transmission | Twin ANSI 120 roller chains | High-strand roller chains or steel belts | 10:1 safety design factor; ASME B20.1 |
| Primary Drive Motor | 11.0 kW SEW motor with brake | 5.5 kW to 30.0 kW inverter duty | Class F insulation; continuous hoist duty |
| Industrial Control Bus | Siemens S7-1200 PLC | Profinet, EtherNet/IP, Modbus-TCP | Dual-channel safety logic; ISO 13849-1 |
Shaft-mounted SEW Eurodrive gearmotors drive heavy live-roller decks inside the carriage and along ground-level staging bays. Diffuse photo-eyes verify pallet alignment before rollers activate. An onboard Siemens PLC coordinates dry-contact and industrial Ethernet handshakes with plant conveyor lines, preventing infeed accumulation jams.
Twin ANSI 120 (ISO 24A-1) roller chains route over case-hardened sprockets, pairing with a steel counterweight stack to offset deadweight across vertical strokes up to 12 meters. Machined T90 guide rails prevent carriage sway under 45 m/min acceleration rates. If chain tension drops, an overspeed governor trips mechanical progressive safety clamps to wedge the guide rails, while base buffer blocks absorb residual stroke energy at the foundation frame.
Carbon steel expanded mesh panels clad all four faces of the structural mast, barring plant personnel from the hoist path. An exterior service ladder incorporates intermediate rest platforms and a rigid vertical lifeline fall-arrest rail, meeting OSHA 1910.28 and EN ISO 14122-4 maintenance standards.
Motorized rapid-roll PVC doors seal elevator shaft openings at each floor landing. Door drives interface with carriage floor-level proximity switches, opening within two seconds of carriage lock. Multi-beam optical light curtains monitor the threshold plane, preventing door descent while pallets cross the loading gap.
Distribution centers route standard GMA, CHEP, and Euro pallets between ground staging zones and upper order-picking mezzanines. Powered roller decks accept automatic transfers from sorting loops, moving unit loads across floors without forklift entry into the hoist envelope.
• [Throughput Benchmark]: Up to 60 pallet transfers per hour at 40 m/min hoist velocity
• [Optical Alignment Control]: Dual retro-reflective sensors verify pallet seating before hoist release
• [Foundation Interface]: Surface anchor baseplates secured with chemical capsule studs
Automated automotive and machinery assembly plants transfer heavy tote bins and palletized sub-assemblies between production bays and overhead buffer tracks. Full-height mesh barriers protect technicians along adjacent assembly lines, while interlocked roll-up doors maintain clean floor zone boundaries.
• [Duty Cycle Standard]: Continuous 3-shift high-cycle industrial manufacturing duty
• [Safety Circuit Rating]: ISO 13849-1 Category 4 / PL e dual-channel interlocks on all access panels
• [Structural Anchoring]: Direct tie-in brackets securing the mast to building mezzanine structural steel
For this heavy-duty series, we can engineer load capacities up to [300] tons, with platform dimensions and lifting heights customized to your operational envelope. Requirements exceeding our standard engineering matrix will undergo a Finite Element Analysis (FEA) by our engineering team to ensure structural viability before proposing a solution.
To initiate the engineering proposal, please provide the following baseline data:
Rated Load Capacity
Maximum Lifting Height & Closed Height
Platform Dimensions (L x W)
Duty Cycle (e.g., operational cycles per hour/day)
Environmental Conditions (e.g., indoor/outdoor, washdown, explosion-proof)
Pit depth or overhead clearance constraints
Yes. The control systems can be equipped with standard communication protocols (e.g., Profinet, Modbus, Ethernet/IP) utilizing [Siemens / Allen-Bradley / Omron] PLCs. This ensures seamless I/O signal synchronization with upstream/downstream conveyors, AGV/AMR units, and your central control room.
Every custom unit undergoes a mandatory Factory Acceptance Test (FAT) prior to dispatch. This includes continuous operational testing at 100% rated load, static overload testing at [120% / 125%] capacity, and the physical triggering of all mechanical anti-fall and hydraulic safety interlocks. FAT documentation and video proof are included in your engineering package.
Upon final approval of the General Arrangement (GA) drawings, the manufacturing lead time is typically 4 to 8 weeks. Oversized structural components are engineered with a modular design to fit into standard shipping containers (20FT/40HQ). On-site assembly utilizes pre-engineered bolted flange connections and heavy-duty aviation plugs, strictly eliminating the need for field welding.
We provide a standard [12/24]-month warranty covering the structural frame and primary hydraulic/electrical components. To minimize operational downtime, a comprehensive set of standard consumables (e.g., cylinder seal kits, travel switches, relays) is shipped alongside your equipment. During the warranty period, replacement parts for non-human-induced failures are dispatched via priority air freight (DHL/FedEx) within 48 hours.
Beyond the warranty, we guarantee lifetime engineering support. Your custom equipment's CAD drawings, electrical schematics, and BOM (Bill of Materials) are permanently archived in our system. This ensures you receive uninterrupted remote troubleshooting, maintenance guidance, and exact spare parts matching for the entire lifecycle of the equipment.
GRADIN designs and manufactures custom heavy-duty lifting, load turning and vertical conveying systems for industrial applications. From stationary scissor lift tables and goods lifts to upenders and VRCs, we engineer each solution around your load capacity, dimensions, travel requirements and site conditions.
Copyright ©2026 GRADIN Machinery. All Rights Reserved
🔒 Your project information is kept confidential. Our engineering team will respond within 24 hours to discuss your requirements and next steps.