Rail-Guided Traversing Scissor Lift | Telescopic Cantilever Platform | Gradin

Engineered for off-highway vehicle assembly and railcar maintenance lines, this motorized rail-guided scissor lift transports assembly crews along trackside workcells. Dual motorized telescopic cantilever decks extend over vehicle running gear, bridging open gaps along tall excavator chassis and mining truck engine compartments.

  • Safe Working Load (SWL): 500 kg rated personnel capacity (150% structural proof tested; EN 280 verified)

  • Collapsed Stature: 500 mm lowered height from rail crown datum

  • Motion Envelope: 1,000 mm vertical scissor elevation / 2 m/min track traverse

  • Platform Configuration: 5,000 x 1,000 mm primary deck with dual 1,000 mm slide extensions

Why Work With GRADIN

  • Rapid Response: Expert engineering consultation from day one.
  • Proven Process: Precision from initial concept to final client approval.
  • Quality Assurance: Documented manufacturing, inspection and pre-shipment testing.
  • Factory-Direct Engineering: Direct communication with the engineering and manufacturing team.
  • Lifetime Support: Technical assistance for the product’s entire operational lifespan.
Specification & Configuration
Engineering Metric Production Baseline ETO Configurable Envelope Safety Compliance & Standards
Personnel Rated Load (SWL) 500 kg (1,102 lbs) 300 kg to 5,000 kg personnel rating 150% static proof test; ANSI/SAIA A92.20
Vertical Lifting Travel 1,000 mm (39.4 in) stroke 500 mm to 6,000 mm vertical travel EN 280:2013+A1:2015; Velocity safety fuses
Lowered Profile Height 500 mm (19.7 in) 350 mm to 1,200 mm custom profiles Structural steel UPN 160 base chassis
Fixed Platform Length 5,000 mm (196.8 in) 2,000 mm to 15,000 mm tandem spans 4 mm checkered anti-slip steel deck
Fixed Platform Width 1,000 mm (39.4 in) 800 mm to 3,500 mm walkway widths ASTM A500 Gr. B / EN 10025-2 S355JR steel
Cantilever Slide Decks Dual 1,000 mm motorized decks Single or dual decks up to 2,500 mm Industrial linear rail guides with ball screws
Rail Traverse Track Floor crane rails (8 m runway) ASCE 40, ASCE 60, DIN 5901 S20 tracks Double-flanged steel wheels; disc brakes
Rail Traverse Speed 2 m/min (6.5 ft/min) 1 m/min to 20 m/min variable speed Enclosed engineering cable drag chain
Vertical Scissor Speed 2 to 3 m/min up / down 1.5 to 6 m/min proportional speed 4.0 kW continuous TEFC motor with soft-start
Perimeter Guarding 1,100 mm safety guardrails 1,000 mm to 1,500 mm railing options Integrated overhead fall-arrest anchor rail
Control System Siemens safety PLC + remotes Rockwell GuardLogix or hardwired relays Dual-channel E-stop; ISO 13849-1 Cat 3 PL d
Operational Signaling Flashing beacon and buzzer Xenon strobes, audio horns, LED zones Visual alerts during traverse and elevation
Fully Customizable: Dimensions and configurations can be tailored to your specific site requirements.
Features

Product Features: Rail-Traversing Kinematics

Motorized Rail Bogies with Integrated Positive Track Clamps
Double-flanged alloy steel wheels ride along ground-embedded ASCE 40 / DIN 5901 S20 crane tracks, driven by twin electric brake gearmotors at a controlled 2 m/min travel rate. Fail-safe electromagnetic brakes pair with heavy-duty mechanical rail clamps to anchor the base chassis against tipping moments whenever the platform elevates. Fully enclosed cable drag chains protect high-flex power conductors along track runs.

Independent Dual Cantilever Slide Decks on Precision Linear Rails
Two 1,000 mm motorized slide decks deploy outward along the 5,000 mm platform edge via electric linear ball-screw actuators. Precision hardened linear guide rails and recirculating ball blocks absorb cantilever bending moments generated by workers leaning against vehicle hulls. Inching push buttons allow technicians to set deck extension spans to match varying chassis profiles.

Heavy Tandem Scissor Mechanism in Structural Steel Tubing
The tandem pantograph scissor linkage utilizes 200 x 100 x 8 mm structural rectangular hollow sections (EN 10025-2 S355JR) mounted to a rigid UPN 160 channel steel base chassis. Induction-hardened Φ90 mm hinge pins turn inside self-lubricating PTFE composite bushings, eliminating platform sway across the 1,000 mm stroke. Dual Bore Φ90 mm / Rod Φ70 mm hydraulic cylinders feature hardline velocity fuses to arrest descent during hydraulic pressure drops.

Interlocked Motion Safety Architecture with Radio Remote Controls
A Siemens safety controller manages motion interlocks: rail drive locks out during elevation, scissor motion isolates during track transit, and motion halts if personnel access gates unlatch. Dual industrial wireless remotes feature integrated E-stops and height-preset indexing, complemented by an overhead fall-arrest anchor track running the full platform length.

Application scenarios

Assembly Plant Integration

Mining Truck & Large Hydraulic Excavator Assembly Bays
Technicians access engine compartments, hydraulic distribution blocks, and operator cabs along heavy chassis assembly lines. Rail bogies shift the lift down the vehicle bay while slide decks advance against cab sills, eliminating falls between platforms and vehicle frames.

  • Cantilever Tip Capacity: 200 kg point load applied at the extreme edge of fully extended 1,000 mm slide decks

  • Duty Cycle Envelope: 3-shift continuous automotive and heavy equipment assembly duty

  • Track Foundation Standard: Dual crane tracks aligned flush to factory floor slab datum

Rail Transit Locomotive & Bogie Maintenance Pits
Maintenance technicians service locomotive cab access panels, HVAC pods, and coach sidewalls from trackside elevations. Mechanical track calipers lock chassis movement under offset personnel weights, while programmable stop heights position workers at exact service access doors.

  • Platform Payload Dynamics: Rated for bilateral technician movement with fall-arrest lanyard tie-offs

  • Track End Protection: Heavy-duty spring buffers and hardwired track limit switches at runway extremes

  • Powertrain Thermal Protection: Class F motor insulation and PTC thermal sensors across drive units

Video Demonstration
PRODUCT DETAILS & WORKSHOP PHOTOS
Global Standards Compliance
GRADIN OEM/ODM CUSTOMIZATION & DELIVERY POLICY

For this heavy-duty series, we can engineer load capacities up to [300] tons, with platform dimensions and lifting heights customized to your operational envelope. Requirements exceeding our standard engineering matrix will undergo a Finite Element Analysis (FEA) by our engineering team to ensure structural viability before proposing a solution.

To initiate the engineering proposal, please provide the following baseline data:

  • Rated Load Capacity

  • Maximum Lifting Height & Closed Height

  • Platform Dimensions (L x W)

  • Duty Cycle (e.g., operational cycles per hour/day)

  • Environmental Conditions (e.g., indoor/outdoor, washdown, explosion-proof)

  • Pit depth or overhead clearance constraints

Yes. The control systems can be equipped with standard communication protocols (e.g., Profinet, Modbus, Ethernet/IP) utilizing [Siemens / Allen-Bradley / Omron] PLCs. This ensures seamless I/O signal synchronization with upstream/downstream conveyors, AGV/AMR units, and your central control room.

Every custom unit undergoes a mandatory Factory Acceptance Test (FAT) prior to dispatch. This includes continuous operational testing at 100% rated load, static overload testing at [120% / 125%] capacity, and the physical triggering of all mechanical anti-fall and hydraulic safety interlocks. FAT documentation and video proof are included in your engineering package.

Upon final approval of the General Arrangement (GA) drawings, the manufacturing lead time is typically 4 to 8 weeks. Oversized structural components are engineered with a modular design to fit into standard shipping containers (20FT/40HQ). On-site assembly utilizes pre-engineered bolted flange connections and heavy-duty aviation plugs, strictly eliminating the need for field welding.

We provide a standard [12/24]-month warranty covering the structural frame and primary hydraulic/electrical components. To minimize operational downtime, a comprehensive set of standard consumables (e.g., cylinder seal kits, travel switches, relays) is shipped alongside your equipment. During the warranty period, replacement parts for non-human-induced failures are dispatched via priority air freight (DHL/FedEx) within 48 hours.

Beyond the warranty, we guarantee lifetime engineering support. Your custom equipment's CAD drawings, electrical schematics, and BOM (Bill of Materials) are permanently archived in our system. This ensures you receive uninterrupted remote troubleshooting, maintenance guidance, and exact spare parts matching for the entire lifecycle of the equipment.

Related Upenders & Material Handling Solutions

Get a Bespoke Engineering Proposal

🔒 Your project information is kept confidential. Our engineering team will respond within 24 hours to discuss your requirements and next steps.